...Change the Belts, clean all rollers, idlers, and braking pads. I would suggest that you also replace the Capstan Pinch Roller. Goodluck.. Hi, Could you please provide more info. The tape is stuck in ...
Question about RS-TR373 Single Cassette Deck
...cable from deck out to receiver in -no resultes.Before cleaning were some bars on display,after cleaning none.Please help double deck is in good shape and was not use wery often I cleaned both decks ...
...from double deck cleaned both heads changed cable did not help Before cleaning some bars on display none after cleaning Look around for micro switches. They might have broke or jammed or
...- 35mm jack) RCA will be connected to DECK, 35 mm jack to your ipod. to use your ipod...change the input setting on your deck to AUX (auxillary) most deck have this for CD Changer connection Good ...
...deck itself has dissconected, but it is strange that niether would work...so im guessing the decks are fine...it might be your extension cable...or u have had a power surge, if that has ...
...change the drive cable? Please help...thanks so much :) I would be happy to help you but there is no "drive cable" on this machine! If you are referring to the main ground drive BELT you can go to ...
Question about 42 in. Precision Cut Plus 24hp Lawn Tractor
...deck or the clutch cable just to change the belt. ensure mower clutch lever is in the off position lift the front of the tractor approx 24 or more inches. lower the mower deck as far as it will go ...
...deck and make sure all the pulleys move freely and function like they should. The cable should have been operating a spring loaded pulley arm that applied tension to the deck belt to make the blades ...
Question about 200 emblem. decklid. winged victory. . nameplates, emblems &
...deck lid ,and now won't open its a 1967 volkswagen Sounds like you accidentally disconnected the cable linkage when you replaced the spring. You'll need a long needle nose pliers to reach the latch ...
Question about 200 emblem. decklid. winged victory. . nameplates, emblems &
...can't get a tape to play. Attached L&R cables to the Input (REC) connectors on Tape Deck (I hadn't changed these) and other ends to L&R connectors on the Receiver (these had been disconnected). ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
