Questions & Answers for: change clutch cable kawasaki

Question about 1990 ZZR 1100

1 Answer

change the oil again but not the filter. This will flush out the dirt and grit that is hampering the clutch. Your clutch cable is probably pretty old and in questionable condition. Consider installing

Ad

Question about Quad Bikes

2 Answers

Clutch appears to be slipping hey dude u gotta change ur clutch plate mannnn..... hi mate adjust the clutch cable on the clutch lever good luck

Ad

Question about 2006 ZX-6R

1 Answer

...not clutching anymore. could it be the clutch fluid or the cable that needs to be change? have you replaced your clutch plates and springs? how many miles do you have on the clutch that's in the

Question about 1976 Z 750

1 Answer

...clutch cable and I pulled out the worm gears on the clutch mechanism. I didn't know that there were tiny ball bearings and they all fell out. I didn't know they were in there until I looked in the ...

Question about 1976 Z 750

1 Answer

...clutch side cover to change the clutches Hello, The clutch cover is removed in a two step process. Remove the clutch cable by loosening the adjustment at top and bottom first. Then remove the cable ...

bikes, wish I still had mine. Need new cable and probably clutch plates. It's very easy to change the clutch. If you get stuck email me at [email protected] and I'll talk you through it

Question about 1976 KE 125

1 Answer

clutch cable adjustment and check when the clutch plates were last changed. Ninja's tend to be ridden hard through the first couple of gears. This can put strain and wear on the clutch friction plates

Question about 2001 VN 1500 Vulcan Classic Tourer - Fi

1 Answer

...change org. clutch lever with chrome lever 2001 kawasaki 1500fi nomad Hi mate if your just changing the actual lever like your question suggests forget the other two answers.If it is a cable clutch ...

Question about 2001 VN 1500 Vulcan Classic Tourer - Fi

5 Answers

...clutch cable is still good, connected properly, and has a little play in the clutch lever. You have some good suggestions but I'm curious if the bike had been sitting for a while, or were you in the ...

this can also wear a clutch out faster. If you've got the clutch stripped down take a Very good look at ALL the rings and plates on both sides and if there is any wear or damage change the whole thing

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...