Questions & Answers for: change center high stop lights

...lights. I discovered that all my center bulbs were burned out and the housing is somewhat melted as if the lights were on for a very long time. Replacing them has no effect as it seems there is no ...

Ad

...change the belt and get the adjuster pully to move, and my dome and mapp lights just stopped working but the fuse is still good not sure which engine you have or if European Focus. Here's what I have ...

Ad

how do i change the break light on my 02 ford focus hatchback? Hi there is a couple of screws if you lift the hatch(boot) up unscrew them remove the light cluster and take it from there

stop as i try to accelerate it revs really high and for a long time before it hits second gear The tps is actually a rheosat type switch. It essentially sends a reduced voltage (between 0vdc and 5vdc)

Question about 2002 SVT Focus

1 Answer

...focus wagon front wheel bearing replacement driver side You must have special equipment to press bearings off and on. If you do not, this is best left to a reliable auto center who has thousands of ...

license plate lights stopped working, tried license plate lights stopped working, tried replacing bulb, still doesnt work. is there a fuse to check? where is the fuse? there is a fuse panel inside the

Question about 2002 SVT Focus

1 Answer

...focus intake manifold sensor engine light comes on code showing intake manifold stuck open and one showing stuck closed no change to performance of car wires are pinched in the transmission bell ...

Focus high beams work low beams don t 2002 Ford Focus sedan 4Dr. auto/trans. What can I do or try? un plug one of the light connectors and check for power and verify ground with a 12v test light tool

Question about 2002 SVT Focus

1 Answer

focus svt high,lean idle when I plug in my brand new mafs and/or the original the car idles up to 4k and the header starts to glow orange (lean)? your headers should not glow orange/red should be nom.

...Focus SVT. Diagnose, while driving, a clunk, then vibration, attempting from 1st to 2nd shift, none occurred. Won't shift even to neutral. What things could be? Manual 6 speed transmission. If you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...