censor? If it does where can I find it? The 3.9L 5.2L and 5.9L engine use the distributor assembly as your cam sensor . The crank sensor is on right rear attached to engine block (behind cylinder head
what is check engine light code #P0016 on 2003 Dodge Ram V-8 and how serious is it? that is the code for cam/crank correlation sensor a bank 1 I would get it checked out
Change cam sensor & erase codes.( disconnect battery for a minute or so after.) 340 & 1391 refer to cam sensor problem, and all other 300 codes are cylinder misfires that should disappear when
At what Milage should a 2003 Dodge Ram 3500 with a Cummins 5.9Litre Diesel Engine need its first Cam Belt Change? check manual, probably 60 k miles
...cam sensor is under the distributor cap.this engine uses the distributor pickup as a cam reference since the distributor is cam driven . had transmission rebuilt on my 2001 ram 1500, 5.9 eng. truck ...
...van no start Code P1391 Loss of crank or cam sensors,P0340 No cam signal at the pcm. I would replace the crank sensor first. Your cam sensor is part of the dist. on 5.2/5.9 engines. Hope that
...change. what should i try next? Timing belt might look good on top but it might be missing the teeth at the crank make sure the cams are turning, if not, replace the timing belt. if belt is o.k., ...
...the shop they said it was perfect, something was telling it to kick in and out . any ideas, ive changed the cam sensor due to rpm not reading Most transmissions work off the throttle position
...cam and crank sensor it fixed it for about 1 week.Then started back changed the cam and crank sensor but didn't fix the problem done changed spark plugs and map sensor.Also checked fuel pressure it ...
...2003 dodge neon died going down the road. Now it won't start. I have checked all the fuses. It seems to be getting fuel. Didn't seem to be getting spark, changed the coil and didn't help. Any ideas? ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions