Questions & Answers for: change brake light switch 2008

...Check your brake lights especially the "HIGH BRAKE LIGHT" this is the one on the cab above the rear window. If it is out replace the bulbs and recheck your cruise control operation. Regards, ...

...brake light switch, changed tali light boards, check ground, Third brake light comes on, has aftermarket trailer wires, brake light indicator comes on the module?????? DID YOU CHECK YOUR FUSE? i have ...

...brake lights 3 rd one works all other lights work. Power to circuit board in back no power coming out changed this circuit board 3 times.GRRRRRRR check the brake light switch down by the brake

brake switch. You can also verify by looking at data in the scan tool that the switch is actually staying "applied", when it really should be "released". If you don't have a scan tool, reach under the

...start..I changed the neutral safety switch switch may need to be adjusted by loosening the bolts on the mounting plate it is adjustable up or down.....check brake safty switch on pedal up under ...

...light bulbs are all good but when i apply the brake pedal no lights to signify that possible switch failure?if so where is the switch? Try looking on the brake pedal arm under the dash, there is ...

How do you hook up wiring for additional brake light You can get power directly from the brake light switch at the light blue/white wire, and your ground can go to and chassis ground available.

...brake light switch. I have no clue what else to change Hi Eric, I don't know but it could be the computer most of the times is down the left side with the steering wheel on the right (here) with the ...

...brake light switch which also kills your cruise control Here's a picture of the stoplight switch,it's attached to your brake medal,see if it's loose. ...

Brake lights don't work on my 2000 Chevy Silverado I changed bulbs and fuses, but they still wont work 2000 Chevy Silverado 1500 Check the switch that is under the dash on the brake pedal arm.