...change brake pads, have removed caliper mounting bolts but cannot locate mounting bracket bolt to remove and finish changing rear brake pads.... can u help? according to the service manual there are ...
2007 Dodge Caliber backup lights not working Brake lights and turn signals work. Back up lights not working. Check the fuse for the back-up lights. Also, check the bulbs themselves. Reverse lights not
Question about 2007 Caliber SXT Sport Hatchback
...brake light housing. After you carefully remove the panel, look for some plastic wingnuts that hold the light housing in, and remove them, you should not need any tools to do this. After the nuts are ...
Question about 2007 Caliber SXT Sport Hatchback
...is what tells your brake lights to come on when it depresses. Check the brake pedal switch which when it gets pressed, swiches on the brake light. Also check the brake light ...
Question about 2007 Caliber SXT Sport Hatchback
...you kow the problem?? the problem is the brake lights, repair them and it will come out of park its a safty feature i think try changing both brake light bulbs if bulbs are good try braks light ...
...light bulb or connector, maybe it's just loose. It may be lose or burned out. Call the local auto-electric shops and ask what they would charge you to replace it THEY COME OUT FROM THE FRONT REMOVE ...
Question about 2007 Caliber SXT Sport Hatchback
how do i turn off the light in the trunk of a 2007 dodge caliber while the trunk is open. remove the bulb!
...Change the bulb twice, but no luck. is there a relay for the headlights?, and if so where are they located? How do you knowq when they're no good? A relay problem would disable both the ...
Question about 2007 Impala LS Sedan New Cars
...brake nor turn signal work I changed the bulb I changed the whole tail light I even change the tail light wiring harness the left still don't work fusees or good the bulbes good the third tail light ...
Question about 2007 Impala LS Sedan New Cars
...brake light switch checked out ok, and there are no brake lights illuminating at all, inspect the wiring harness going from the brake switch to the bulbs themselves. There could be an issue with ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions