Questions & Answers for: change belt truck

...change the oil, services, ect but our timing belt was never changed so i am wondering when it should have been done Timing belts are suppose to be changed every 60,000 miles. i was told timing belts ...

...belt change Is there any instructions for changing the timing belt for dodge? What parts has to be changed,other than the belt? you will need to change the belt tencioner aswell if you havent don a ...

other belts changed drive belts could be loose. with a hyundai usely you change your timing belt plus water pump. I got 5 hyundai and every time i change timing belt well the w/p get off for a new one

...belt change - which mileages? 245k on clock, changed once at 197k 1.8 L no turbo station wagon (estate) subaru legacy 1991. Cam belt changed 197k, now at 245k. When does cam belt need re-replacing, ...

...belt change at 100k. Most Honda dealers like you to change the belt at 90,000 miles (90k). some auto repair places will want to change the belt at 60k but that is not necessary (Note: if in a severe ...

...change serpentine belt, 2004 Toyota Tundra how to change serpentine belt? locate tensioner pulley; release tension from belt; remove belt; make sure not to forget how the belt is routed; route belt ...

...change Peugeot Expert Van had its cam belt changed at 66,000, it is now on 113,000 and is 5 years 1 month since the belt was changed, when does the belt need changing again? Most cam belts need to be ...

...change your timing belt and waterpump, as you are on borrowed time on the timing belt. The waterpump and tensioner should be changed along with the timing belt, as they can ruin a new timing belt if ...

...or third change after the 60k timing belt change. to be on the safe side id change the belt every 55,000 to 65;000 miles make sure u change the belt tensioner as well they fail more than the ...

...belt change interval Questions & Answers (with ... www.fixya.com > Forum > Tags > timing belt change interval ...timing belt on my charade having 67800 Km since i never replaced it manual says ...