Questions & Answers for: change air filter homelite chainsaw

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

2 Answers

...works. check the flapper valve at the rear of carb.possile it is loose letting in too much fuel. Same problem here.... Rebuilt the carb.... Changed the plug, cleaned air filter... Same

Ad

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

1 Answer

...AIR FILTER. MEL check gas tank vent and cap. Adjust carb a small amount ie. back out screw marked L 1/4 turn. If that does not work adjust screw marked "H" 1/4 turn out if no results adjust ...

Ad

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

1 Answer

...Air filter looks clean. Spark plug dried off. It starts for about 5 seconds and then dies. It is spitting the gas mix out the right side by some black cover - same area where spark plug is physically ...

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

1 Answer

fuel line? As long as the line fits tight so its not sucking air you should be ok.. try changing out the plug if its old. Clean out the air filter too.. But the line should be ok as long as its tight.

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

2 Answers

air filter; adjusting with a dirty filter can cause a run lean condition once cleaned and the saw run. Clean the spark arrestor and muffler; if the saw cannot exhale it cannot inhale. There are 2 wav

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

3 Answers

...air filter and start it up. Have your helper squirt some starter fluid into the air intake to keep it running for a couple minutes until the partial blockage in the carburater clears. Joe Thanks for ...

Question about Consumer Products 9.0 Amp, 14 In. Chainsaw

1 Answer

will start but wont stay running Clean the carburator and check L and H skrew adjustments.Clean the air filter,check the fuel line for air leaks.I also recomend a fuel filter change.

Question about Xl-98a, Xl-98c, Xl98-d, Xl98-e Cut-off Saw Air Filter Gasket 50951

1 Answer

homelite xl-98c will not start I have changed the sparkplug and still cant get homelite xl 98-c Changing a spark plug rarely fixes a no start problem. You need to troubleshoot the saw more. Do a ...

Question about Homelite Fuel Tank Fits Trimmers 308181008

1 Answer

...change it anyway) and enough of two different fuel line to reach your trimmer's carb , I stock a few of these here and you can buy ne from any roybi dealer , the only tool you need besides your ...

Change the air filter, that’s almost always the problem. You could also change the fuel filter and spark plug. It wouldn’t hurt. Although it could be the carb, These things I mentioned should be tried

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...