Questions & Answers for: change 1994 gmc truck turn

GMC Sonoma 1994. please check your brake light switch located near the brake pedal. it could be faulty. tnx 4 using fixya, drcool Brake lights do not work. Turn signals do work. i have 1991 gmc sonoma

1994 gmc sierra. some times when i brake 'check brakes' light in dash will turn on and engine studders. -checked fuse.-changed brake light switch.-changed ignition switch,because at first brake lights

1994 gmc mini van turn signal broken need help on how to replace replacing turn signal on a 1994 gmc mini van has tilt,cruz cont,hi&low on control If the switch is broken, you need to remove: driver ...

1994 GMC half ton extended cab and my third brake light is working but the rear two do not. I have changed the turn signal switch and the brake light switch. I have rear parking lights as well as turn

...Gmc Jimmy left turn signals work, but righr turn signal won't. I replaced bulbs front and rear but they will not flash. If they come on when turned to the right but don't flash I would say flasher ...

TURN SIGNAL SWITCH UNIT IS BAD,HOPEFULLY FOR YOU THE FLASHER IS BAD BECAUSE THE T-SIGNAL SWITCH IS EXPENSIVE,BECAUSE THE DIMMER SWITCH,HAZZARD SWITCH,AND THE WIPER SWITCH ARE ALL ON THE SAME UNIT WITH

...turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect ...

...truck! Turn signals won't work and no signal light in dash please help single mom and its my son truck! If the fuse is good and it has voltage, the problem could be the flasher or the turn ...

...1994 GMC Jimmy flops up and down instead of locking in place when I try to signal. Is it simply the turn signal switch/lever that needs to be replaced? Or something more? Just fit a new one the ball ...

...1994 Honda Passport How to change turn signal switch on 1994 Honda passport Hey dean how's it going ? here is video on how to do it ! It's not the same vehicle but should be close ! How To Install ...