...jeep cherokee door troubles the driver side and passenger doors are starting to fall off, i dont know if its the hinges or a different problem.they are moving down and out from their normal spot can ...
Question about 2001 Grand Cherokee
...01 jeep grand ch I want to program my automatic garage door control into my 01 jeep grand cherokee, how can i do that? Hold down the button on your garage door opener while pushing one of the 3 ...
Jeep Cherokee Limited - 5.8lL V8 4x4 - 4 Door. Which years fit this vehicle . and what's the proceedure for replacement. 1993 to 1997 should be the same. if there are bolts on the hinge, your laughing
Jeep Cherokee, and it's my hinges? I was told it would run about 5-6 hundred to repair!! This is horrible. I'm gonna contact Chrysler. This is the factory solution: http://www.lunghd.com/Tech_Articles
Question about 1994 Grand Cherokee
...Jeep Grand Cherokee Larado My door bottom hinge has seperated from the door and now the top is breaking loose. Is there a fix to this or do I have to buy another door? The only correct way to repair ...
...jeep grand cherokee When I close the door on my 99 jeep grand cherokee I hear a ''clunking'' noise. I have oiled and WD 40'd the hinges to no avail. Any solutions?? GO TO ANY AUTO STORE AND GET NEW ...
Jeep Grand Cherokee Ltd has the front passenger door hinge that amkes a load clicking noise when it is opened or closed. there is a plastic piece that slides in the center of the door hing if you look
...change 94 cherokee door hinge. Do you really need to change the door hinge or did the hinge pull out of the base metal on the body. More than likely the hinge is pulling out of the base metal. If so ...
...Jeep Grand Cherokee The hinges are held together with two top, and two bottom, 10 millimeter bolts. (At the pivot point) However, one half of the hinge is welded to the pillar, the other half to the ...
Question about 1994 Grand Cherokee
...Jeep Cherokee and I cannot get the driver's door to close. I am thinking that the latch in the door is at the wrong angle. Does anybody have any solutions? You should change the hinge pins or ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions