Questions & Answers for: chang plugs 2002 ford explorer

...plugs about to change fuel filter unable to locate 98 ford explore eddie bauer all wheel drive 5.0 v8 fuel filter is underneath truck on the frame rail size a a soup can.. be careful when removing as ...

2002 ford explorer V8. Car was running great had oil changed at walmart. Drove across parking lot car stalled. I can get engine to start but will not turn over. check for loose connector particularly ...

...module on a 2002 Ford explorer XLT with V8 so I can read label info The PCM is in the firewall on the passenger side and work to remove it is done under the hood and from the passenger

...2002 ford explorer, v8 Look on pages 269 and 270 of the owners manual. Checking and adding manual transmission fluid (if equipped) 1. Make sure the vehicle is on a level surface or level hoist. 2. ...

...2002. i changed the plugs and it ran great for about ten minutes, then it started miss firering again. it is even worse on lpg gas. i changed the coil on plug around to see if the problem changed to ...

plugs. 2) there is no safe or legal way to add a third row seat to a vehicle that did not come from the factory without extensive modification. Doing so correctly would exceed the value of your truck.

What is the spark plug gap setting for a six cylinder 2002 Ford XLT Explorer? V6 - 4.0L - FI - - GAS Champion Plug is gapped at .054 same with the V8 - 4.6L - FI - - GAS

2002 Ford Explorer V8 cranks but won't start? Why is my 2002 Ford Explorer V8 cranks but won't start? No spark or no gas.  Are you sure the gas gauge acurrate?  When you turn the

...ford explorer I just changed the oil and filter and replaced the spark plugs. Now I have a rattle on the front right bank. It lost power and misses. One of those plugs isn't right, or you mixed the ...

...2002 ford explorer limited edition where is the pcv valve located? so the pcv valve is on the driver's side of the engine master cylinder this is the back firewall. and if you look real close you can ...