Questions & Answers for: chamberlain liftmaster trouble closing

Chamberlain Liftmaster Pro. Garage door Problems closing I have a Chamberlain Liftmaster Professional Garage door opener 1/3 horse power. We are having trouble closing the door with the wall mount as ...

...Liftmaster Chamberlain 3265-267. Today I opened the garage door using the wall door control. Now there is no power to any part of the system. The wall control is dead (not even that faint light for ...

TRouble getting the door to close without banging into the overhead motor. Is there a manual available to help? I would remove the logic board and look for loose connections on the printed circuit.

...trouble adjusting the up travel. I can't get the door high enough to get my truck in the garage. When I take the door to the floor it lacks about 4'' opening far enough, if I start closing the door ...

My Craftsman Liftmaster will close using the wall keypad, but it won't open unless you hold the keypad down until it gets to the top. Then, the light blinks for about 5 seconds. I've checked the ...

WITH MY LIFT-MASTER DOWN FOR PARTS,I'VE BEEN USING THE MANUAL MODE UNHOOKING THE TROLLEY& LIFTING.I'VE USED THIS BEFORE WITH OUT MUCH EFFORT,NOW ITS REAL HEAVY.THE DOOR CLOSES UN-EVEN WITH RIGHT ...

We're having trouble with the remotes will open the door but will not shut it. Tried recoding but did not work. What next? If the main light flashes 10 times when you try to close the door it is a ...

...3 screws to remove it, and it seems to be an easy replacement---why can't I find the part??? i have chamberlain liftmaster 1/3 hp we having trouble with no power at all and smell like burn ...

Hello , I have a sears 139.18050 3/4 hp garage door opener , about 8 years old , that has just started to give us trouble; it wont close without holding the button down , reverses and flashes the ...

...trouble shooted this issue with a dooer bell in the past but cant seem to figure thisa one out it an 5 year old unit ...and i have minimal money so is ther a wire that needs to be added or eliminated ...