Questions & Answers for: chainsaw runs doesnt spin

...doesnt spin When console is turned on the game disj wont run, doesnt spin at all??? try removing the disc first, turn off the power, uplug from the power source, remove harddrive, reattach harddrive, ...

chainsaw wnet to put on new chain and now the chain doesnt spin when you start it and pull the trigger and no the chain brake is not locked Check the tensioner screw, it could be too tight. Loosen the

...runs and cuts fine but the chain doesnt stop spinning when its just idling. is there a way to fix this or does it always do this because its so old and doesnt really have any safety features on it ...

...The drill should start to run. ..Your done. If it doesnt work, spin the chuck the other way. This polerizes the stator and will work. BE CARFULL. Happy Generating! Let me know how it goes, ...

...chainsaw, runs fine , blade spins when given throttle, as soon as blade and bar are placed on wood the blade will stop. Engine will still run with as much throttle that is given to it, lift bar from ...

...chainsaw the clutches and rod holding them in place came out of the side of the saw how van I fix this the saw runs great and I don't want ta throw it away if there is a way to fix it Many saws ...

...chainsaw, the problem is the chain doesnt turn,when i take the bar and chain off the sprocket turns but as soon as the bar and chain are put back the motor runs but the sprocket doesnt turn,ive tried ...

What plug is required for a husqvarna 36 chainsaw Chainsaw won't run and wanted to knowingly low adjustments as well check where coil (has plug attached) is gapped correctly fro flywheel/rotor. ...

my sthil saw ts410 pull cord just pulls out freely and retracts but doesnt start the saw<what could be wrong with it? Either the starter pawl on the pulley has stuck or is worn out. Check for loose

Husqvarna 350 chainsaw does not run in the cold? doesnt this one have a little blue choke lever you pull out ? not there anymore ? they do sell parts for these still !!