Questions & Answers for: chainsaw cut curve

...chainsaw it cuts in a curve and jams, I heard it is not sharpened correctly.If it curves to the left is the right side of the chain blunt or vise versa ? yes if chain is not right it will cut o one ...

...chainsaw, model 350. Is cutting in a curve instead straight. Have replaced bar and chain, problem remains. What is wrong with this unit. Thanks You need to sharpen chain or buy a new one. Chain is ...

...chainsaw, it wont cut straight. i have a husqvarna 350 chainsaw, it wont cut straight throuh a log without cutting at an angle and getting jamed. what is the problem , any sharpening tips THE ONLY ...

Curves to the right while cutting Remove the bar and chain. Use a flat file to remove any burrs, wire edges, or uneven wear on the bar. The other possibility is it wasn't sharpened properly. I'd wager

...to cut. Like this the teeth shoud be point away from the saw towards the front.of the blade. Ther rakes that hace a c type curve face forward also that is between the teeth and removes the cut

curve, and then will not cut. Depth gauges are correct and chain is sharp. Will plunge cut and cuts small logs, but will not go through a big log. What might be the problem please ? Cutting in a curve

chainsaw does not cut straight through logs, rather it cuts slanted and small smoke comes out from the chain/bar. What could be the problem? The chain needs sharpened or replaced. You can purchase the

How to change the cutting line in a curved shaft fs45 ******* Don't know how to put new cutting line on the spool No, I'm not sure why STIHL even makes curved shaft trimmers at all. I have ...

when cutting with my chainsaw the cut curves to the right when digging into the wood flip the bar over and see if it still to the same side if not the chain is not sharped right

Ihave a Husquvarna chainsaw I just sharpened but when it cuts into the log it curves to the right and jams halfway through the log. first flip the bar over that will show if the bar is bent if still ...