Questions & Answers for: chain guard

chain guard that is giving me troubles--I need to know how to assemble the chain with the guard see if theres a master link on the chain and take off from that way you dont have to take off the guard.

...chain guard. How and where do I make adjustments? Examine the top of the chain guard where it mounts to the bicycle. Loosen the fasteners enough to slide the chain guard in and out. Adjust it so it ...

...Push that guard back towards the handle firmly until it clicks. It should work now. The other possibility is if you just changed the chain that the safety isn't correctly engaged with the

...guard also hold the chain bar in place. So after a few minutes of usage the chain comes loose. thanks dave check inside guard andchain bar for tensioner bolt which slots into guide bar and tensions ...

...chain brake is activated, if the hand guard is connected to the brake cover, carefully clamp the brake in a vice ( be careful not to damage the cover ) now pull the hand guard fully back until the ...

chain guard off along with it (the chain guard that bolts directly onto the crankcase). I couls have just rebolted it back on, but my issue is - the whole thread for the bolt got pulled off along with

...chain guard, should be 2 bolts holding the chain bar in place. Then make sure there isnt another bolt or screw you missed, pop off cover put chain on, replace chain guard and tighten chain. It should ...

...chain guard. There is always a slight "wobble" of the front chain ring, check to make sure the chain isn't slapping the chain guard. The chain guard can be adjusted. The chain also might have loose ...

...the brake. Push the brush guard forward (towards the bar and chain) to lock the chain. Pull the brush guard towards the large handle to unlock the chain. If there is anything else please write