Questions & Answers for: cd player noisy

noisy DVD/RW rom my computer dvd player has a problem with the plastic wheel (sorry dont know the technical name) that inserted in the casing. I presume its to stop the disk spinning out of balance.? ...

cd player resets itself and the clanking you hear is the cd changer resetting itself. The plastic trays of the cd player are driven by plastic gears. These gears are noisy when new, after a few years,

CD player ticking?? Hi there, I have just bought a TEAC DRH-300DAB and when I play a CD a consistent light ticking sound appears after about 5 seconds, and then doesn't stop. It is not very noisy, and

...or more rubber mounts one of rhat rubber mount damaged. or is anything stuc inside the player . if you have warranty go with problem occurd cd and sho it to them. they have to fix it .isnt it?

amp, not a tape, CD, or DVD. The signal from a record player is much lower, hence, if you use the phono input for a tape player it is noisy and loud. Clean the needle too. I hope this solves the issue

I get disk error using any dvd disk Motor is noisy while spinning, disk error using any dvd or cd disk. Suppect motor control speed failure

...player is noisy open cd tray there will be a small steel rod or shaft will be there.remove greec/dust by wiping using soft cloth,apply little vaseline/creme on shaft move black porTion for 2/3 times ...

my pitch always fluctuating Try putting a little CRC226 in the pitch control. You can get it at HomeDepot in the electrical dept. Make sure to use ONLY that product as there are other CRC products ...

gets real blurry and noisy... but when I use a cd player on the cd exit - its crystal clear.. any ideas? You need to use a different input. Phono is a different type of signal than other audio sources

...cd), The player is turning, several times, trying to find the boot but it's noisy (ugly cracks) and finally nothing's happening. I have to eject... Any Idea will be welcome. Thanks in advance The ...