Questions & Answers for: causes stiff gear shift

...stiff gears particularly into reverse. One of the most common causes of hard shift is the clutch no fully disengaging, also do you put it in 2nd before you try 1st or reverse, it helps stop gear ...

Ad

Question about 2003 YZ 450 F

2 Answers

stiff shifting into second gear 4 speed transmission, with a slack clutch cable, could it be the slack cable making it hard to shift? or would be possibly be more transmission related? could be worn ...

Ad

...gear and clutch gone loose I have a 1989 jeep wrangler. yesterday, after the stick shift felt stiff to shift all of a sudden, the clutch felt suddenly loose. Today, the stick shift stopped moving ...

Question about 1989 Wrangler

1 Answer

...gear,i really have to try hard. my clutch leaver becomes so stiff i can barely pull it back to shift up gears,but not all the time,only occasonally. i have stopped riding cause i dont want to damage ...

...shift down and are very stiff - is this a flawed design or just a repair issue or adjustment one? Sounds like your selector arm is binding on the shaft. Has the oil been replaced recently? If not, it ...

...gear shift is very stiff. what's the cause and how do i rectify it? chris good old fashioned oil can woirks wonders ,no spray stuff with that fish oil just good old fashioned engine oil in a oil ...

...gear stick is very stiff, what caused it? Bit late but thought I'd add my two cents, I've got a 2007 f/focus auto, my shifter became extremely hard to shift the other day, I continued driving to work ...

Question about 2004 RX-8

1 Answer

...STIFF OR DIFFICULT SHIFT. CHECK BY PUTTING VEHICLE ON FLAT GROUND ENGINE OFF. GET INTO 1ST GEAR. THEN PUSH IN CLUTCH AND START CAR WITH BRAKE OFF IF CAR STARTS ROLLING THEN CLUTCVH IS STILL TRYING TO ...

...gear shift sorta stiff to move shift lever in consel stiff when changining gears and sometimes will not start in park Hi This condition is usually caused by the transmission gear shift tower seizing ...

gears just grind when switching to reverse. The shift action is stiff. Is the engine idling at normal speed? To fast an idle will cause this. If the transmission has its own fluid is it full and clean

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...