Questions & Answers for: causes pink screen digital camera

...screen turns pink in color and is unable to capture any images. The menus display properly as does images previously captured and stored to the internal memory. No memory card in camera when it ...

pink and red on my screen. The pictures even come out the same way. I am afraid that heat might have caused damage to my lens? I left my izone 310 in my glove compartment during hot weather and now it

...pink. Most likely youve damage the lcd screen either by dropping it even though you didnt, but that would be the only cause this problem, line on a lcd screen are usually cause by a broken power ...

...pink and everytime i try and take a picture my screen goes black and shuts off without the camera piece going back in! I have almost the same problem except when I take a picture and go into the mode ...

...And now everything is like pink, orange, red, and purple and all blurred and misshapen... Included is a picture of my camera screen. I hope there is another solution besides just getting it

...screen is flickering. Took a photo and it is all pink. Battery is fully charged. Everything was fine last time I used it, a couple of days ago. Problem now solved. I switched the camera on and off a ...

...pink/purple. Any ideas what may cause this? Try this...go into the camera menu and find "reset"...follow the on-screen instructions. Download any pics you want to save from the card. Go into the menu ...

screen shows white and pink colour with horizontal lines. I turn off the camera and sometimes it can take pictures again. The camera was not dropped or anything else - water, sand etc... Actually it's

...causes a pink section at bottom of screen when turning camera on? I turned on my camera today to take some pictures and there is about a 2 inch wide pink section at the very bottom of the screen. It ...

...pink on camera screen and when downloaded to computer-what would cause this? Perhaps you did select a SCN mode, with the main dial. Or chose a wrong white balance setting. Please switch the camera to ...