Question about 8260 Mechanical Sewing Machine
...catch on bobbin. I have a euro-pro 9110 and my thread will not catch the bobbin thread. It was sewing fine then it acted like the needle jammed. I turned the machine off and raised the pressure foot ...
...catch bobbin thread I have a euro-pro shark model 9110 . I was sewing fine then the needle acted like it got jammed, so I turned the machine off and rethreaded the bobbin. Now the upper thread just ...
...Bobbin. Please Help Me. Shannon Go to this address http://www.euro-pro.com/europro/faqdetail.aspx?modelno=998B It does not list a 9988A, but I would imagine there is not much difference in how the ...
Question about 9120 Computerized Sewing Machine
...up the bobbin thread. Please assist. Thank you, Cassandra Thompson Call 1-800-361-4639; one of the Euro-Pro sewing machine phone reps can tell you what to do and they may be able to send you a
Cannot get thread from bobbin to feed up, Help!! Have the Euro Pro Shark and cannot get the thread in the bobbin to catch with the top thread. Any suggestions cananyone help me with this. anna
...knotting I am trying to sew and the thread keeps knotting up. Ensure you have cotton thread on the bobbin and that the bobbin is placed with the thread counterclockwise. It may also be the
...and rethreaded both bobbin and upper thread. Tension is ok. What is there that can be wrong. try changing the needle clean under the needle plate area & the bobbin area for lint or loose ...
...catch bobbin thread, will not sew try a new needletry adjusting the top thread tensionmake sure the bobbin is inserted correcty in the bobbin casealso possible that the machine could be out of time ...
Question about Dressmaker 998B
...bobbin thread not catching and I think that must be why after reading so many other people have the same issue with this model. I'm going to try to contact the manufacturer and see if they can ...
...machine, make sure there is a long tail coming out of the bobbin. Thread machine correctly and when trying to "pick-up" the bobbin thread, make sure you are spinning the flywheel the right
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions