Questions & Answers for: carver audio

I need a 48" replacement ribbon for a Carver AL 111 speaker can you help locate one please The system is a high end sub woofer w/amp. I would definitely suggest returning unit to Carver for ...

...Carver Audio forums that metal shavings inside the case are an issue with this unit. So I used an achohol based spray and cleaned the switchs and the circuit board, (there was a fair amount of ...

carver pm-1.5 power amp has constant buzz in speakers carver pm-1.5 power amp has constant buzz in speakers, try removing ground jumper on back

Connecting NAD 314 Receiver\ preamp to Carver M-500t to speakers I have an integrated amplifier ( NAD 314 : 35 W PC) with a Main in & preamp out jacks. They have metal jumpers that are u-shaped. I ...

Carver manuel for model # PM-1201 magnetic field power amp. Want to know how to hook it up and the right way. Regsiter with hifiengine.com and downlaod it. ...

...Carver M 400 amp. How do I fix it? If the hum disappears when you unplug the input audio cables, you need to use BALANCED lines to the amp. Read up on balanced lines and XLR connectors and TRS ...

I have a carver cascade red light comes on then there is a click, what can cause it Power supply failure

Yes I wanted to get a manual for a carver c1 pre amplifier can you direct me to where I could get one to download Google (carver)(c1)(manual) without parens.

Carver ct-26v preamp no sound on front left and back spekers Check for bad connections of the rca jacks. could need a recap also

my carver 2000 receiver randomly will turn itself off for no reason why is this? Heat most likely, without knowing if it's in a cabinet or not or if it's on top of another device like an amp or VCR ...