...carburator adjustments to be preformed while the engine is idling and at normal operating temp in plain english let the car warm up then make your idle and mixture adjustments if this doesnt solve it ...
Question about 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned
New carburator doesn't passed fuel hey friends I have a 17" craftman weedeater, and replaced the carburator the book manuel just change the way the carburator works. The vaccum adjustment are not ...
Question about 1991 Accord
...idle screw adjuster. You can see the screw from the outside of the carb. If so, try adjusting the carburator with a screwdriver. Unlike fuel injected Engines they can be manually
Question about 25cc Gas Line Trimmer
...How do adjust the carburator? What are the settings for the two screws. Thanks SG Replace all of the lines before any adjustments, too small to see air leaks are a common cause the issue you
How can you adjust the carburetor on a 1987 GMC safari van V-6 If the carburator has never been rebuilt, or the plugs that were installed at the factory have never been removed, you need to remove ...
How adjust a carburator after replace a new kit This is a very hard carburator to adjust best to take it to a carburator shop and let them deal with it.
Question about 1988 Ram 50
what does "h" or "l" stand for on a carburator adjustment screw ? what does "h" or "l" stand for on a carburator adjustment screw ? H is the high speed adjustment ( screw in to ...
Question about 1988 Ram 50
how to adjust everything on a Mikuni carburator , The float , needle valves, air ,fuel? This carburator is on a Club Car Golf Cart Hi Twila224, for more information about your question please visit ...
Question about 25cc 4-cycle Mini Tiller
honda 25 cc 4 cycle mini tiller how to adjust carburator how can you adjust the carburator With one screw you can adjust the idle speed, and with the second, located under the carburetor you can ...
carburator adjustments how do i make carburator adjustments Should be two holes on the side of the case towards the back. One is for high adjustment and the other for low adjustment. Hope this helps.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions