Questions & Answers for: car stalls revs down

...stalls with the handbrake on in every gear. it is just one of those cars that drive like that its different but you need to change your driving style to suit if it has over 100k miles you may want to ...

...1000. I have tested the clutch with the hand brake on and the engine stalls in every gear, is this normal for the high revs. my friend has same model its normal he said it does it more so when its ...

...car loses revs and trys to cut out when ticking over,the revs then start to bounce. i have change the airflow meter and had all the sensors checked on a diagnosics machine and they cant find a fault. ...

...revs low to the point it stalls. goes back and forth , won't maintain a level idle. I have to press the gas pedal so it won't stall, so either im stalling at a intersection or slowing down to make a ...

...rio 2004 starts but wont idle and i have to keep revs high to stop it from stalling. So when slowing down iit stalls and have to re start in high rev. help.... idle air control valve Best regards ...

I have a 2003 GMC Envoy I had to replace the alternator as my battery light came on and it would not hold a charge. Took it into the mechanics and the alternator needed to be replaced. When I got it ...

revs up and down almost stalling out, when revving up my car would go if I wasn't pressing the brake. It has stalled twice and there's definitely an issue. No eng light has been shown.

...Car will stall instantly when started cold unless accelerator is down keeping revs up. After 5 minutes of driving the revs will drop to 200-300rpm when gearing down to stop and shudder badly but 9/10 ...

...I start to slow down it stalls and I have to restart the car. It smells as if its overheating but my gauge reads that its good. Any ideas? did you changer the oil, filter check all electric connect

...car slows I have to change down a gear or 2 and really give it revs just so it doesn't stall. Sometimes it stalls anyway and I have to change gears and let the clutch out to force it to start again. ...