...shakes at higher speeds Hi, My chevy mailbu shakes while driving on the interstate. It usually happens at speeds of 60 or above. The steering wheel shakes. This is not constant as it can repeatedly ...
...shakes in the front end when brakes applied and going around 40 mph. Ok at lower and higher speeds. Shaking is really bad when brakes applied at higher speeds. please help. more than likely you need ...
...trans, 4 cyl. Car is shaking around 1700 RPM the most shake is on higher speed (40 mph ) i think that will be 3rd or 4th gear. What it can be? It could be as simple as your tire balance is
...higher speeds and when braking The shaking is probably caused by two seperate things. First shaking at high speeds is usually tire balance. Second the shaking when braking is usually the front pads ...
...at higher speeds and the shake gets worse at higher speeds it is probably a tire problem. or the u joints. lift the vehicle and spin the tires, look for irregularity in the tread. bumps or
...higher speeds and the front end starts shaking, I would bet your front brake rotors are warped. The price of new ones is pretty cheap, so i would replace them and the brake pads. You may also want to ...
Question about 2001 L-Series
...car is being drove, at lower speeds it shakes severally. At higher speeds it seems to stop. I have had the tires checked and the berrings and the struts etc. Nothing. It still shakes! It was just ...
higher my 92 Lincoln's front end will bounce and shake.Does it have shocks on the front end? It has regular shocks on the front. i have same problem at high speed my car will start to shake up
Question about 2003 Regal
...steering wheel shakes and it's pulling dramatically to the left. At higher speeds (above 50) the steering still shakes and a loud humming (wheel bearing?). CHECK FOR A BROKEN BELT IN THE ...
Question about 2003 Regal
shakes when shifting gears & at higher speeds.. 60+ It stops when at steady speed. Just had engine replaced started shakeing then, What's up? drive shaft could be loose or motor mounts need tightened.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
