...loud but when put into gear it gets much louder. Also my car goes through alot of transmission fluid but It never looks like there is anything leaking under my car. i am not sure if that has anything ...
...loud when i give it some gas. eventually if i drive it long enough without turning it off it stops sometimes. the sounds happens all the time, when idling, in reverse, but its loudest when in drive. ...
...car and I see where a flex pipe has come loose from a steel pipe barely. That's why it's only loud when it's in drive, it is pulling apart. And when it's not in drive, the pipes are together, making ...
...loud banging, Have you checked the front U-joints behind the brake rotors. As for the Reverse noise? Auto or stick shift? When a vibration suddenly starts to happen, it means that something is ...
...car back it sounded and ran perfect...now months later my exhaust sounds ridiculously loud (there might be a whole i think) and when i shift into drive and reverse it makes a loud sqeaking noise! im ...
...loud vibration noise 60 to 70 mph. Replaced all rear axle bearings, ring & pinion, had drive shaft balanced. Will make noise with both axles pulled out of housing. has a new transfer case, ...
...car is making an awful groaning grinding noise noise when it starts. The noise stops after it starts. Put my foot on the brake it starts again. put thr car in reverse no problem put it in,drive it ...
Question about 1996 Grand Cherokee
...loud knocking noise when i turn in both directions and also when i have it in reverse , second problem is when I'm driving i have to take my foot off of the gas and back on it in order to get ...
...loud. Starter runs well and no codes show up on the scanner. Have your motor mounts checked. With the hood open and the emergency brake on Watch for excessive movement with the engine while you put ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions