Questions & Answers for: car humming noise step gas

humming noise thru my speakers i bought the amp and installed it a couple of weeks ago and since then i always get this humming noise and when i step on the gas to my jeep is gets louder and louder ...

...humming noise sound like possible fuel filter has some dirt in it you are suspose to change every timr you change oil or the fuel pump is over heating when you drive it try the filter first the there ...

...noise When I step on the pedal I hear the humming from the rear end, as soon as I let off the gas it quites down. If I need to replace the rear end what is a good estimate to replace? THIS IS A GEAR ...

...gas pedal at speeds above 60km/h, a loud humming vibration is heard and felt. Similar to driving with rear windows down.Stepping off gas and noise goes away. It is a defeaning noise, like wind ...

...humming noise when you turn the key to the start possition ? Is the fuel pressure regulator working ? ask for the mass air flow sensor cleaner at AutoZone ok spray it on the carb do not take of the ...

car take a while for me to turn it on, i would have to crank it about 3 or 4 times, cant remember if it made a humming noise. when it did turn on, i also noticed the radio buttons i had just set right

...humming sound that can only be heard inside the car. The sound is not heard outside the car or from under the hood. It seems to be more from the backend rather than the front. It is louder when the ...

...car, there is a loud humming coming from under the hood on the driver's side. The noise diminishes as the car slows down (does not stop just by taking foot off gas pedal, it is when car actually ...

...humming noise? or bad motor mounts Bad O2 sensors affect the fuel/air mixture. Vibrations can be caused by many sources, hard to diagnose here. To test the motor mounts. apply the parking brake, open ...

...humming noise when I step on the gas. Any one have a clue as to what could cause this Could be power steering pump bleeding. Could be transmission converter. Need to isolate them to the source. ...