...clicking noise, as the car turns. This is usually when drivers find out there is a problem, and by this time the cv joint is shot. Usually the entire axle is changed with a new or rebuilt unit. Axles ...
...clicking noise in the front end when going over bumps.When lifting front of car, the axle feels loose on the transaxle side of shaft on both sides. Does this mean that the CV joints are bad? I Have ...
...clicking when you turn the wheal, then its a cv joint. If its making a bump bump bump noise as you go down the road and increases with speed and slows with speed then its probably a bering, It sounds ...
...clicking or ticking noise at idle speed. All fluids are at propers levels including the oil. There are no check engine or other warning lights. I suspect an oil lifter. If so, should I pay to fix it ...
Question about 1998 Camry
...clicking noises when going over bumps. The noise is getting louder. Stabilisers are new and the steering still feels firm. Anyone know what is causing the noise and how it can be fixed? It may not be ...
...clicking noise coming from the lower control arm on the rear passenger side, I have changed the wheel bearing,brake pads, ball joint, tow link and sway bar bushings and it didn't help at all. Any ...
...clicking noise coming from, what I think is the rear passenger wheel area. Click click, click, click... and stops... Until the next braking... 2. When go over the bump or on uneven surface feels like ...
...clicking noise coming from, what I think is the rear passenger wheel area. Click click, click, click... and stops... Until the next braking... 2. When go over a bump/hump or on uneven surface feels ...
...car and do the following: - Sit if front of right wheel, slightly move it right and left and feel any abnormal noise if coming out of it. If click-click or Tuck-Tuck sound is observed it could be due ...
Question about 1998 Continental
...car makes rattle noise when going over tiny bumps at low speed. Also makes a loud squeaking noise when turning the wheel left when moving and not moving . ( guessing ball joint ) IF NOT TRY SWAY BAR ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions