Questions & Answers for: cant watch cover back

Watch cover cant get back cover on 1)put a little silicon grease around the case cover 2)put cover back on the case 3)lay the watch on a hard surface spicifically on the edge of a wooden chair or ...

...watch has a stainless steel back so i cant change the battery what do i do? There is a tool that you need that adjusts to the three holes or openings in the back of your watch and it just screws off. ...

...cant get the cover back on First - you have to align the groove for stem. Second - a lot of pressure. I doubt you can do it without a special case back closing tool. If you are not successful, there ...

...cant seem to get the back of the watch off. How do i change the battery in my Columbia watch. Remove the back cover. On some watches, the cover will pry off using a very small flat-bladed screwdriver ...

cant get cover back on. Whats the trick? mcdevito75 here, Look for any matching Slot or groove or tab in the cover and the caseing. Example, there may be a small cutout in the cover for the stem, make

watch to change the battery now i cant get the back on mcdevito75 here Look very closely at the back cover for anything that will line up with the case, as an example a little cut out in the cover for

...cover to replase the cell cant put back lid help watch #355less You will probably need a watch press to get the back on. Call around at your local jewelers as they will have one if they carry

cant get back cover back on use a very small good FLAT OBJECT AND PUT COVER ON ONE SIDE AND THEN WITH TOOL ON OTHER SIDE PULL COVER BACK TOWADS YOU AND FOCE COVER ON

lost the manual I cant set the time, date etc. $ buttons Try link below by using the module nbr found on the back cover (4 digit nbr in a frame). Timepieces Watches Manuals CASIO

...watch cant figure out how to remove back short of smashing the damn thing Watch backs are usually either push-fit and simply need to be levered off, or are twist-fit and need to be rotated off. If ...