...Canon MX310, when I plug in power, it just beeps and power light blank, display showing "canon" and flashing. please help!!!! thanks. Sounds terminal. The good thing is that machine would have to be ...
Question about PIXMA MX310 All-In-One Printer
...Canon MX310 printer is flashing Waiting For Report and the In use/memory light is on all the time. There are not reports to print as far as we can see Remove all print jobs at your computer Turn off ...
Question about PIXMA MX310 All-In-One Printer
...supply blew up from thunder. Please advise me of any cost involved. Thaks a million. Vick ...
cable. Is it the printer or the computer that says it is offline. Has the printer been plugged into power and powered on ? Does the printer have a driver for the Canon MX310 ? What OS are you running
Question about PIXMA MX310 All-In-One Printer
...canon mx310 series printer There are several possibilities. Have you changed out a ink cartridge lately? You can try and do a power reset by holding the power button for about 1 second until the ...
...canon MX310? unplug power cord for 1 minute. Look on the back of the printer to see if you have an access door to the rollers. Sometimes it isn;t apparent but printers generally have an access to the ...
Question about MX310 Office All-In-One Printer
...Printer by following these steps: Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds. Push the ...
Canon mx310 ink absorber is full, how can it be reset. Hello, Turn off the printer then hold the button Resume/Cancel (Red tri angel in the circle), click on an indicator light green. Release the ...
...and close the MX310 cover. Wait 30 seconds. 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power"
Question about PIXMA MX310 All-In-One Printer
...the MX310 cover. Wait 30 seconds. 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button. Good Luck ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions