Questions & Answers for: canon printer cutting right side

...printer can't load paper anymore. All it says is lead edge detect error. And I don't see the red light when it tries to detect the edge. first check the green led on the panel (feeder selection) ...

...right side of page. Information on right hand side of page is missing. Have you tried to make a copy by using the by-pass tray or manual feed tray. If the copies come out OK then the problem may be ...

canon pixma mp530 makes a loud noise most times when it powers up and when i print a document. It works OK otherwise. My MP-530 would try to boot up making a noise like something slipping or grinding,

...right margin is always wider to allow for punch holes in file paper. It is not the printer settings you need to adjust, it is the page layout of your word processing software. Adjust the margin ...

...canon LBP 2900B Note: Need to clean the printer after replacing the toner cartridge. Only use the toner cartridge designed for this printer. NEVER touch any of the high voltage parts inside the top ...

canon ip2600 won't feed paper I fixed mine!!  I cut a letter size paper in half lengthwise (so it was skinny and long).  Held the printer on my lap with both top and bottom trays ...

... currently our computer tecks adjusted my margins on my computer but now the printing is to the right and it is very small printer tiflon is damage please contact the shop kapeer and repair tefon ...

...right side and bottom cut- off abt. 3/4". any ideas? when printing a map, starts ok then slowly pulls to left a until paper jams. Verify the fuser unit exit parts,a little paper is jammed,or the ...

...Canon imageRUNNER 3230. Starting this morning, it has been printing everything off center. If you send a document to the copier for printing, it shifts the image to the left so that the far left of ...

Printer cuts off power immediately. Hello ! My Canon Pixma ip 6220D has its two cartridges blocked on the right hand side of rail. I can manually move the cart to the left. As soon as I put the power ...