...canon.com/consumer/controller?act=SuprtKnowledgeBaseAct&fcategoryid=257&modelid=13528 This did NOT solved my flashing led (15 times) also magneta led is off and when i re-install the cartridge its ...
Question about PIXMA iP4300 InkJet Photo Printer
...CANON iP4300 printer does not print and has a yellow light that flashes 13 times. What does that mean?? This according to the user's guide: The remaining ink level cannot be correctly detected. ...
Question about PIXMA iP4300 InkJet Photo Printer
...Ip4300 - When I try to print Orange light flashes on printer. Error Message: "Operator Error. Press Printer's RESUME button. If this does not clear the error cancel printing and turn the printer off ...
...iP4300 manual says this for 10 flashes " The size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A4, Letter, A5, and 5" x 7". ...
pixma canon printer. When I am trying to print it shows me an error "Operator error. Press the printer RESUME button. If it doens't clear the error cancel printing and turn the printer off and then on
...canon printer. 1. Turn off printer. 2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color. 3. let go button Resume/Cancel, continuing to retain POWER. 4. ...
RESUME/CANCEL button on the printer. The printer resumes printing. Inner Cover was opened while printing is in progress. Close the Inner Cover and press the RESUME/CANCEL button on the printer. A page
Question about PIXMA iP4300 InkJet Photo Printer
...button located? Thanks, Charlie On the ip4200 the resume button is under the power button on the front of the printer and is called the cancel/resume button. Same for the 4300 cancel/ resume is
Question about PIXMA iP4300 InkJet Photo Printer
...Ip4300 the yellow light flashes at 10 times intervals. The printer does not responde to anything. Thanks Dave This is from Canon's web site... Ten flashes:The Cassette is not installed ...
...canon ip4200 & ip4300 printers to the factory default settings ? 1. Power down your IP4200, then press the "Resume/Cancel" button. Press the "Power" button, and hold both buttons as you continue ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions