Questions & Answers for: canon pixma ip4200 blinking lights

...canon ip4200 printer, the lights are all on, yet the amber warning light keeps blinking about 15 times. When I try to print, a window pops up and says that the ink is unrecognizable. Any suggestions? ...

...blinking. Whats the solution?Thank you. To find out more on the nature of the Error type - go to the Canon customer support for this machine. I suspect it means the Waste Ink tank need cleaning out. ...

Canon PIxma i4200 - INK Ink tanks full but lights blinking and won't let me print as it says no ink in tank. I refilled tanks myself. Help!!! All are full. I'm about to throw it out the window!!! Help

...IP4200 was working fine until yesterday, when I accidently triggered a huge print, and may have pressed the wrong button (or for too long) to cancel printing. Now it accepts my print command, feeds ...

...canon-pixma-ip4200-printer-service-manual If that helps please rate my solution I have the Canon Pixma iP4000R printer. I had an error code of 6A00 and my power light was blinking/flashing ...

...Pixma iP4200 purcjased 7/18/2007 What can I do? You cant realy do anything, i had the same problem whit my IP5000. I tryed everything but nothing helped, after speaking whit canon here in sweden they ...

...blinking lights on the printer that involve the power switch (green light)and the button below it (yellow light). I have tried turning it off and restarting, but it immediately goes back to the ...

ORANGE LIGHT BLINKS TWICE When printer is asked to print it makes all the noises, doesn't print, and orange light blinks twice, then gap, then continues the two blink sequence 2 blinking means "No ...

...Canon Pixma IP4200 Blinking Power and resume light. Hi Error 6A00 The 6A00 is a Canon generic code for paper path jam. Solution 1: Move the printhead carriage back and forth a few times. Solution 2: ...

...Pixma ip4200 printer on, the green light is on, but the resume button light(yellow) blinks five times. I got an operator error message to turn the printer off, then turn it back on. I've done ...