...IP4500: low ink detection How do I turn this back on if it has been turned off for an ink cartridge please? you will need a resetter. Some vendors of ink refills sells the resetter. But csot about ...
Canon IP4500 and have fitted new inks however error message says an ink tank error has occured.Open the printers cover and replace the ink tank on which the ink lamp is off. I Have tried changing this
Canon iP4500 Driver should have been install correcly. Connect USB cable. Before connect power, press and hold power button then connect the power. At the same time Hold power button, and press reject
Canon PIXMA ip4500 will not turn on I had a power outage in my apartment yesterday and today my Canon PIXMA ip4500 printer will not turn on. I have tried plugging it to different outlets. There is ...
Question about Pixma iP4500 InkJet Printer
...Canon IP4500, how do I set it back to factory default so that I can monitor the inks again? It will set itself back as you install new Canon inks, but will be turned off for the remaining inks until ...
Question about Pixma iP4500 InkJet Printer
...canon pixma iP4500, ... but i can't find the ink cartdiges ?? every opening does not lead to the ink.. PLEASE HELPP i need tro print NOW turn printer on and open front cover. carriage unit will come ...
my ip4500 wont let me put in new catridge..cartridge holder wont come across ok unplug printer,,,open top,,try to manualy pull it over or move ie a little bit ,,turn it on see if that works
Question about Pixma iP4500 InkJet Printer
...canon ip4500 printer and it came up with service error 5c20 but it was working fine just before as i printed 160 sheets http://www.very-clever.com/information/xbddkhxaxnexmq The above link indicates ...
...USB cable to the driver you downloaded from the Internet.If windows finds himself then the problem is the USB turntable. Call the appropriate Canon printer service. check Download Canon iP4500 ...
Canon IP4500 printer is dead, 2. Press and hold the resume button on Canon IP4500, 3. Press and hold the power button on Canon IP4500, 4. Release the resume button on Canon IP4500, 5. Press the resume
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions