Questions & Answers for: cannister vacuum hose clogs

...vacuum cleaner that need to be cleaned out regularly (monthly in the user's guide). But the reason ours was shutting down is a protective circuit that cuts power for 30 minutes to avoid burning up a ...

...hose is ok, and there is suction at the cannister, then **** up a small **** of paper, one for each room outlet, have a number on each piece of paper, Which ever one doesn't ,ake it thru to the ...

...HOSE NONE OF THE DUST IS ACTUALLY MAKING IT INTO THE CANNISTER, PLEASE GIVE ME SOME SUGGESTIONS I KEEP CLEANING THE HOSE AFTER EACH USE WHAT A HASSLE!!!! What is the solution to this problem

...hose on the back of the cannister! Unit is designed to shut off for 30 minutes when this happens to protect your motor. Remove top of hose where debris enters the cannister through a filter above it, ...

...cannister, just turn the ring on the end of the hose to release. Take it outside and push a long thin object through it to force out the clogged hair or debris. The motor is designed to shut off the ...

...vacuum with none of it going into the cannister. I have made sure that the cannister is correctly placed and the lock is pushed in all the way. Check that the filters are completely clean. If there ...

Cannister Vacuum has no suction. The hose is not clogged and I don't know what to do. If the motor is running and is not full of dirt, and the hose is not plugged, the canister must be cracked or open

Vacuum not suctioning properly and dirt is not reaching cannister. for sure a clog some where in the hose most likely, or where the hose enters the vacuum

...Cannister Vacuum cleaner. The red light comes on when I plug in the vacuum. while that is supposed to indicate a full bag, the light will come on and stay on even when I have just put in a new bag. I ...

...the cannister engine makes a pounding noise and easily heats. The vacuum is only a few months old. then return it to SEARS as faulty Faulty motor or clogged hose , full bag , clogged pre motor ...