Questions & Answers for: cam seal removal

cam seal leak how to fix cam seal leak on 1999 subaru legacy Replacing the cam seal is really more time consuming than difficult. The EJ-25 motor requires the removal of front covers, timing belt, and

...cam shaft seal that is leaking. Its a pretty easy fix. Remove the top timing belt cover , and the crankshaft sensor wiring you may have to remove the front engine mount . Set #1 piston at TDC, Loosen ...

cam shaft seal.. could oil be coming from that one...i do know that the leak is down low somwhere This sounds like the crank seal, the engine doesnt have to be removed, in order to get to seal is like

...cam shaft seal i have access to both i can not get the cam seal out any ideas on to get it out ? and also i can not remove sprocket on the crank shaft to get to the seal any ideas on how to get that ...

the top of my motor on my neon1997 is apart but I can't get my camshaft out to replace seals , was told this was easy job .Do I have to take off the whole timing belt assembly ? can I without a Puller

...seal got a link behide the timeing belt Don't quiet understand your question...but here's some insight. The chain is under the valve cover/s ( 1.8t and some 2.8 V6.) and drives 2 or 4 cam shafts. If ...

...seal, remove the old cam shaft bearing cap seals. Replace the bearing cap seals and the valve cover seal and replace the cap and cover. Tighten the bolts to about 30 lbs and that should resolve the ...

...cam shaft seal in Geo Tracker,1.6 liter engine replace front cam shaft seal,and timming belt,and align timming marks. remove tbelt (lots of steps see link) remove front cog on cable( 8v head is diffr ...

...cam seal, while you're at it you may as well change the crank seal too. Reinstall everything in reverse order.After you get it back together, you'll have to recode your radio, if it is equipped with ...

...from the front of the engine. Remove the timing belt tensioner, remove the belt, remove the cam gears, replace the seals. The seals have to be pryed out. Be careful not to scar up the cams. ...