Questions & Answers for: cam position sensor 1998 dodge

...cam position sensor repeat failure 2.5L 4 cyl. engine works perfect then no start. Engine cranks but no spark. Dealer replaced cam pos sensor located in the distributor and ran fine. 13 mos. later, ...

my dodge Dakota keeps dieing every time i turn it on why does it do that? crank position sensor and/or cam position sensor bad

...cam position senor replaced had computer checked and replaced vehicle will turn over but not firing to injectors or coil something has shut it completley down It should have two relays that control ...

...position sensor on a 1998 Dodge Dakota 5.2L Truck won't start. Used OBD II code checker: P0340. Camshaft position sensor. Where is this sensor located? The camshaft position sensor is located ...

camshaft position sensor 1999 dodge dakota I don't list a cam sensor for a V6 Dakota because it uses a distributor.

but no spark. I've replaced the drive coil,(disc under the cap and rotor), and the ignition coil. Still no spark. crank position sensor or cam position sensor, also check if the wires are still intact

...I can't find the crankshaft and camshaft sensor on my 2001 Dodge Dakota These videos should be helpful 1998 dakota crank position sensor repair August 2011 ...

...it ha compression fuel and spark but will not start,i was told that the distributor has a cam sensor and everything has to be perfect how do you set it? U must put it on the points should have ...

position sensor i have a 5.9l V8 and i have an oil filter sandwich adapter how can i change the crank sensor without removeing the exhaust header and oil filter adapter Hi Michael, The link below is a

Cam Sensor Failure Causing no Start or Stalling : Dodge ... RepairPal.com https://repairpal.com > Problems > Dodge > Dakota On 3.7L V6 and 4.7L V8 engines the camshaft position sensor may fail causing