Questions & Answers for: Toyota Land Cruiser cam bearing

steering wheel shakes at 75 kms . tyres are new and have been balanced 3 times. have had a mechanic check and found play in wheel bearing to stub , and sticky needle bearings on king pins. awaiting on

Ringing sound on a Toyota Land Cruiser SX 2L Turbo 1991 Model When I'm driving my toyota land cruiser 1991 2L turbo I'm hearing a ringing sound like there is a loose washer contacting against a loose ...

bearing or diff stranger sound I have Toyota Prado TX year 1997 chassis KZJ95-0067487 it makes noise in the rear wheel bearing. I replaced the bearing by new one but two days after replacement the ...

Have a 1998 landcruiser, 1FZ FE engine. It has a bearing incased in a small pulley. It looks as if i need to split the pulley in half to replace the bearing. But if i am wrong i will destroy the ...

one of the bearing, ac belt passon is broken. Hi, I have toyota HZJ 79 models in a field location. The working conditions are bad. This morning we saw that one bearing is broken. This bearing is ...

i need camshaft bearing cap torque setting; 1999 100series 1fze engine thanks Camshaft Bearing Cap Bolt 124 ft.lb. of torque Maybe for a Main bearing Cap, Certainly not for a Cam bearing

torque settings on cranck sharf bearings Torque settings for V-6 engine. Main bearing cap bolts torque: Torque: 27 N·m (275 kgf·cm, 20 ft·lbf) Mark the front of the main bearing cap bolt with ...

"rumble strip" noise there is an intermittent noise that sounds like running over a rumble strip check the wheel bearings for condition and adjustment as it may be a failing bearing

Hi I need the torque settings for both the cylinder head and the bottom end bearings for a 1997 Toyota Prado (3.4litre petrol). Thanks 1997 Toyota Prado 5VZ-FE Cylinder head bolts: Tighten the ...

bearing will maintain the flywheel in position. Unless you are saying that the motor spins freely but will not start which is different . If that is the case check that the cam shaft is turning(broken