Questions & Answers for: Mazda Protege cam bearing

...Cam bearing caps and head bolts the pdf manual says it is 10 - 13 ft lbs from my research it is 75 ft lbs I hope I am right cus I just set my head at that :( before i got the pdf file! havent started ...

Ad

car make noise, look like is left wheel bearing or transmission. When turn right noise dissapear. When car is risen on stands , noise only when left wheel is turning. It is wheel bearing or ...

Ad

Question about 1992 Protege

1 Answer

...The crank pulley should have a mark that is approx 12 o clock with an arrow on the block. Both cams should have marks,'I' for the rear cam and E for the front, and the dowel pins (in the end of ...

Question about 2002 Protege

1 Answer

how do i pull the hub off my 2002 mazda , on drivers side front REMOVAL & INSTALLATION Except Miata FRONT Before servicing the vehicle, refer to the precautions in the beginning of this section. ...

Mazda 323 how I get the hub of on the front wheel to change the bearing. Warming up to get it of ??? Let's make sure you got the correct wheel bearings. 1.57 in. bore; 2.91 in. outer diameter; ...

2001 protege parts diagram There is a shaft coming out of the right side of the transmission that ends in a mounting bracket with a bearing before attaching to the drive shaft for the right side. My ...

...and the car cutoff, will turnover but will not crank. I can take the oil cap off and see one of the CAM's turning and turning freely My 1995 Mazda Protege 1.5L was running fine. We were driving home ...

what are the timing marks for a 1.5 mazda 4 cyl engine there are two different size cam gears not possible to have two different size gears on the cams . I take it that it is a twin overhead cam to ...

cam, and at last the timing bearing. 7. Press and hold the timing belt to keep it firm on the gears and loosen the timing bearing. It will get adjusted by itself with the help of spring attached to it

Why does belt to alternator keep skeaking + snapping? The past 2 years my belt skeaks. It snapped 3 times. I had a new alternater put in but same problem. 3 different mechanics said the other wheels ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...