Questions & Answers for: Jeep cam bearing

...bearings have spun, chances are there is metal throughout all oil passages in the engine and that cam bearings may have been affected...Block should be boiled out and have new cam bearings

...cam bearing damage. In order to do the job correctly and actually have it work for more than a week when finished, remove the engine and tear it down completely. have it boiled out and have the cam ...

...meaning that you have water in the oil, and may have done internal damage to either lifters, cam or engine bearings. Do not drive it and have it checked out immediately. Needing head gaskets

4.0 in jeep cherokee knocking loud no oil coming to 3 rockers 40p.s.i on oil gauge Sounds like you have spun eather a main bearing or a cam bearing. Need to disassemble and inspect.

...cam bearings as well) Other reason is a oil pump screen that has been partially obstructed with hard carbon deposits due to low quality, high paraffin oil. Chances are that the next fifteen people ...

...right!! Most machine shops charge very little to replace the cam bearings especially if they do the boil out for you. Unless you can rent or get the bearing tool cheaply, it's worth having that

...bearing often damages the cam bearings but is often ignored when doing that repair). Often blamed for but very rarely the cause of low pressure is the oil pump. Pumps will get internally worn also ...

...be looking for besides replaceing the oil pump. The main bearings and connecting rod bearings. The cam bearings. The wrist pins. These are the first bearings that get oil from the oil pump. When you ...

...cam engines) and/or valve stems can open up the valve lash and cause noise. So too can a bent pushrod or a broken valve spring.RAPPING OR DEEP KNOCKING ENGINE SOUNDUsually bad news. A deep rapping ...

mechanic book my engine seized and no check oil light came on before hand. furthermore it'd had been 1,200 miles since the last oil change! what did i miss? which engine? size? the ECU nor any lamp ...