Questions & Answers for: calibrating drive circle

compass out of whack with my truck pointed north, compass reads NW! anybody know how to fix this???? You need to recalibrate the compass. The procedure is in your owners manual. Here are the basic ...

...drive carefully in a small circle slowly clockwise and then counterclockwise several times. as youre doing this it might suddenly pop up "calibration complete" or something similar. i almost forgot- ...

drive in circles.Find a large empty parking lot to do this.I just crank the steering wheel and keep going in circles.The DIC will say calibrating.When the compass shows direction and temperature it is

the OFF position.3.  Slowly drive the vehicle in a circle no more than five times at no more than 5 km/h (3 mph) until CIRCLE slowly changes to CALIBRATION COMPLETED in the message center display

...drive in a circle one or two times to reacquire your position. 2. Turn ignition to the ON position. 3. Start the engine. 4. From Info menu, select the Compass/Odometer function. (Do not select Trip, ...

it says need to calibrate Follow the direction of the radar detector. Usually you push the button sequence for calibrate and you drive the car in two circles so it can calibrate the compass.

Calibrating the compass? Drive to an empty car parking lot and drive 5 circles one way and then 5 circles the other way. Not too fast. That light is an engine malfunction light. You need a code reader

...calibrating a vehicle compass. Find a large EMPTY car parking lot. Press the Calibration buttons and drive in 10 tight circles clockwise and then 10 tight circles anticlockwise. The light on my ...

...display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is

...control system can become slightly out of calibration, causing it to spin in circles. Try recalibrating the joystick controls by following the instructions in the user manual. Loose ...