Questions & Answers for: cadence sensor

...cadence sensor. (GSC10) 2. Turned on my garmin 305 edge outside to acquire satellites (probably not nec but did it anyway) 3. Pressed reset on the GSC10, saw red/green flash (what order?) 4. Here's ...

...Cadence Sensor W.I.N.D. To activate the cadence sensor in your training computer, select Settings > Features > Shoes/bikes > Bike 1/2/3 > On > Cadence > On. Teach new sensor? is ...

cadence sensor is set to YES press the reset on the cadence sensor and rotate the cranks - the LEDs should flash every time the magnet passes the sensor. if not its the position of the magent relative

cadence sensor they need to be paired. As they communicate wirelessly with each other the Edge needs to connect to each sensor before it can receive input from it. The initial pairing needs to be done

...cadence sensor now - will it work with new 500 I have a cadence sensor now and use the Forerunner 305. If I upgrade to the new Edge 500 will the cadence sensor still work - or do I have to buy a new ...

...cadence sensor isnt detecting anything. The manual says that the magnet must be within 3mm of the sensor but, with the kit supplied, there is at least 1cm between the two. Any suggestions for how to ...

...cadence/speed sensor how to use garmin edge 705 's cadence/speed sensor , I can not switch on the speed sensor when I do my indoor bicycle trainer workout. you must disable the gps speed and enable ...

...cadence sensor First check your settings and make sure that cadence is turned on. Then: #1) check to make sure that your cadence sensor has not moved and is still within 1-2mm of the magnet on the ...

Looking for locations to mount speed/cadence sensor to my bike. This sensor mounts to the rear chainstay opposite the side with your drivetrain (gears).

...cadence sensor of which I have been very happy with, however went out in rain and since then it has stopped working, I thought it may have been water logged. On opening sensor it was completely dry ...