Questions & Answers for: cable clutch motorcycle works

Question about 2006 FMX 650

1 Answer

...Clutch Cable How do I adjust this motorcycle clutch cable? What tools and parts do I need? What are the steps for changing the clutch cable? Usually there are 2 adjustment points. One at the clutch ...

Ad

...does not engage worked prior my 1986 kx 125 clutch does not engage. worked prior to replacing clutch cable. please help possible the cable is needing to be adjusted make sure it is pulling on the ...

Ad

...185. the clutch wont work. the cable is fine. any ideas? check the clutch plate on the side o the bike remove where the clutch cable goes in remove an inspect the clutch an see if ya got one in ...

...clutch cable the clutch something electrical. This is my moms bike and she really needs it to work HELP PLEASE your clutch may be burnt up, but try adjusting the clutch cable out a little more, or if ...

...clutch cable either will not move or just crall with engine reving in gear Is the pressure plate (springs) ok? New discs will not work if they don't have enough pressure on them. Do you have any ...

Question about 1999 VZ 800 Marauder

2 Answers

...clutch cable if the clutch needs to actuate more strongly and provide more power to the wheel. Loosen the clutch cable adjuster bolts near the crankcase using a 13 or 15 millimeter wrench until there ...

Question about 1999 VZ 800 Marauder

1 Answer

clutch cable if the clutch needs to "grab" more, via the clutch cable adjuster bolts near the crankcase, until there is a small amount of play in the cable. You should be able to move the clutch lever

Question about 1999 VZ 800 Marauder

1 Answer

...replaced If you replaced the cable and you have no clcutch, recheck your work. Typically, you must adjust the clutch and or the clutch cable for proper operation. Thanks for your interest in ...

...clutch cable/lever pulling in the clutch lever will not fully disengage the clutch plates and the end result is clutch drag when a clutch is properly adjusted the clutch plates completely disengage ...

clutch cable has stretched, is there any free play on clutch leaver? is there a link adjuster on the cable? Hi gonna explain the problem an the fix.Take it to a very good motorcycle shop tell them you

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...