Questions & Answers for: c2002 compressor problems

...inside the regulator, and you will probably have to replace the regulator. Problem is if its a c2002 series 3 you have he buy the whole manifold unless you get lucky on

c2002 150 psi gal compressor the pressure regulator is always set at 0 and no air at outlets, but the tank is fill of air 150psi. what could be the problem According to Porter-Cable (Delta) themselves

...download a users manual to see if there is a fuze. Looks like there are a few to choose from under C2002. http://www.dewaltservicenet.com/Products/ProductManual.aspx?q=C2002 Please let me know if

...compressor shuts down but if there is a problem with the check valve then it will allow the air to escape back out from the take. Here is a link to the parts breakdown: ...

The drain valve does not close all the way. When compressor is on air constantly leaks out. Probably just need to be replaced or you can try to spray some wd-40 on it see if it is not just hanging up.

my c2006 compressor filled with air to capacity. used all the air However, compressor would not switch on to recover air. I flipped the on/off switch but nothing happened. I let it sit to cool down ...

C2002 Type 3 air compressor will build air in the tank, but I am not getting a pressure reading on the regulator gauge. I have same problem with my PC2002 type 3 AC and come to find out after removing

porter cable c2002 does not shut off automatically Pressure switch problem ! Replace all for Digital Controller. Check this site for solution: www.CompressorController.com

tank will not cut off by its self Do you meant - your air pressure switch ? Advise - install an digital Controller and all problems with your compressor goes away. Check for Compressor Controller

...compressor tank builds up to 150 psi but 'regulated air' stays at zero and, of course, no air out. Thanks The attached link provides a work around, There are repair kits available. Dissemble and make ...