Questions & Answers for: bypass switch door front load

switch bypassed as this is a safety issue. Ok after having a repair man come and do nothing, he looked at it like it was a ufo LOL for anyone owning a front load washer if it does everything buy spin,

...bypass the switch. If it works, the switch needs replaced. The part is fairly cheap but the labor can be trouble. Press an hold the Drain/Spin button for 3 seconds- the light will go out and you can ...

...switch only uses a live and neutral so you can bypass it by taping the two wires together, make sure they don't touch the cabinet, replug the machine then put it on a spin to test. This is a cheap ...

...will either need to get this switch replaced or rewire it and bypass the switch but if bypassed remember that the MACHINE CAN WORK WHILE DOOR IS OPEN !!!!!!!!!! Not recommended if kids in

...switch is bypass so that is good and I can see the motor revolved in the motor housing with power on. When I manually turn the agitator, it moves then when I try to manually move the spin drum it ...

...BYPASS A SWITCH UR HOUSE WILL BE FLOODED INS WILL NOT COVER IT. YOU NEED A DOOR LATCH, AN MMC AN PROB A BELLOWS CAUSE YOU WILL RUIN IT PUTTING THE SPRING CLAMP BACK ON. DO URSELF A FAVOR AN CALL A ...

Door Lock micro switch may need replacing. The switch can be tested by a technician bypassing it or reading impedance to see if micro switch is opening and closing. Try first disconnecting power for a

washer on panel says od and won't turn on Open Door? Door microswitch is out of whack Try slamming the door shut fairly hard Or if you have the skill bypass the door switch to prove that it the ...

...door switch. It might be due to a broken wire harness, broken door lock/switch assembly, or in worst cases a faulty control board. Unplug the machine or disconnect power. Open the washer door then ...

...bypass the door lock to get rid of the "LO" error message You can short the door switch and it will stay activated BUT the DANGER is that it will be available to be opened at any time ...