Question about 52 In. San Lorenzo, Rustic with Leather Accents Fan
bypass" switch you can select it and then use a wall control (or pullchain if there is one attached to the fan). Or . . . 5. Add-on remote kits Some fan remote systems are not built into the fan, they
Question about 52 In. White Redington III¿ Ceiling Fan w/ Remote Control & Light Kit
...remote or receiver in the fan failed the fan would be useless unless you could find another remote and receiver. On looking on Ceiling Fan Company sites I saw that they sold remote control devices ...
Question about 52 In. White Redington III¿ Ceiling Fan w/ Remote Control & Light Kit
bypass the remote if the fan will operate without the remote. You can try disconnecting the receiver in the canopy of the van (the cover that fits snug to the ceiling) once you have shut off the power
Question about 52 In. Ant. Brass Redington III¿ Quick Connect Fan w/Remote, Light Kit
...bypass the reciever or do i have to get another? Can a use the universal reciever that came with the new remote i bought? You can try the universal receiver. The white, black, and green wires are the ...
...batteries do not help. How do I turn on the light without using the controller? The fan would have to be rewired to bypass the remote receiver to allow the manual switch to operate the light. ...
...bypass the remote in the canopy) and test the functions to make sure the fan and light are working. If it works without the remote, but not with the remote, and the dip switches are set the same and ...
Question about 48670 Flemish Pewter Finish Ceiling Fan
...bypass the radio controller in the fixture and install an after market receiver and remote to control it again. These are sold at Home Depot and work with any paddle fan.I hope this helps & ...
...to bypass the remote and run the fan manually instead of with the remote? Only if it was an add-on remote. You might have a bad receiver. Try changing the dip switches and see if that does
Question about Ceiling Fan Light Switch Control
...is that the portion of the receiver in the fixture that controls the light has failed. The solution seems to be to bypass the receiver and connect power directly to the light with pullchain
Question about Ceiling Fan Light Switch Control
...bypass the receiver located at the top of . drop ceiling trim and receiver should be located in the electrical box. Remotes and receivers are readily available on the internet. not an uncommon ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions