Questions & Answers for: where to buy a latch cube

...are getting caught in the mechanism. any idea if the whol ice maker has to be replaced or can I buy a thermostat? Thanks Hollow cubes are usually a result of lack of water ...

GE Freezer door???? my ge freezer; when I push the ice cube selection kicks the freezer door open before any ice cubes come out? the ice bin is not all the way in pull it out and the push it all the ...

...cube tray will not release ice cubes Simply buy a replacement tray. The flexability of the old tray is gone and so no flex means cubes stay put. Aggrevating. A new flex tray is around 20 bucks and ...

...cube maker is broken the plastic notched tray that gets the cubes from the icemaker to the in-door dispenser seems to be broken and is jamming the rotating tabs that get the cubes out of the ice ...

cube ends up on the bottom of the dishwasher. Is there anyway I can fix the dispenser or do I need to have a serviceman come out? Try cleaning the compartment. If the latching is not OK, it could be a

...cube. Well what I found was that the rod MUST fit into an "H" shaped latch located at the back of the freezer. When sliding the ice tray in place this rod was not fitting into the latch correctly but ...

...allow it is a bottom kitchen aid freezer This is a common problem,Throw the tray in the bin and buy ice cube bags from any supermarket. You will produce a lot more ice and bigger cubes. Regards ...

...cube ice" if you push this it will remove a gate up in the front of the ice make. If it not working. Remove the ice tray and you will see long rod on the ice tray. Move the rod back and forth afew ...

cube fans and I wanted to buy some molds that were a bit different from the regular shapes. Any ideas? Actually you could go crazy. There are so many different ice cube trays out there, themes, shapes

...buy ice cube trays with lids so that everything does not spill all over the place in the freezer? Bed, Bath and Beyond have a great ice cube try that has a lid which slides on. I think it's a ...