Questions & Answers for: button open close roof 2004

...open the trunk This problem could be caused by a sensor being trapped or a fuse has blown, check your fuse box under the hood Identify the one for the roof system it may also be the same one for the ...

VW dealer in my area. the adjustments can be a bit tricky but there are a couple of things you can try.....lube all the seals around the soft top and between the windows ,a light smear of vaseline can

...button (which opens and closes roof) for 10 sec,and it should close electically! this was done but, no result, so finally manual says ''in emegency'' remove panel, near switch on back is mini-crank ...

...open with button or key what do I do UPDATE: I thought I was posting regarding a 1998 E36. Not sure a 99 has the same fuse or interlock. please make sure that he roof close as the boot will not open ...

...bug is not convertible can i make it?? how No, you can't make it into a convertible. Many tried, many failed. Convertibles are designed with beefed up parts to withstand the incredible torsional ...

...Open the roof and remove the rear seat pad and back rest. You'll see the rear quarter panel trim is one piece plastic! Remove the screws holding it in place and lift it up and lay it aside with the ...

...close half way. Any suggestions? I am not sure what you are trying to do. But if the problem is that the roof will only open to the first stage, sun roof, and no further, the problem is the package ...

...want to work, accessed the button in the truck to close it. Finally got it shut but the light keeps blinking saying it's still open. It's bugging me. Anyone know how I can get it to stop flashing?? ...

...open position. Is there a manual override to close the roof? It does not even sound like the motor is trying to work. I have been told it is probably the Brain, but for now I just need to get it ...

...open button it will open. I can then open and close back and forward but if I close it lower than where I lifted it to it won't open again, the hydraulic motor won't start unless it's lifted ...