Questions & Answers for: Jeep Grand Cherokee bulb failure

...failure;" however the breaklights, tail lights, and reverse lights all work fine. This is the case when the lights are turned on or off. This problem started shortly after I pulled a U-Haul trailer ...

...failure is most likely a bulb somewhere, but there is also a sensor in the hatch area behind a panel between the hatch and spare tire that could be bad. The "coolant sensor bad" is the sensor in the ...

...frequently and I have no lights out in my 96 Grand Cher. What is the problem? have you changed any bulbs in the rear lights yet? you can put 2 different bulbs in the 3rd brake lamp,921 and a 922.

...failure but my signal driving and brake lights all work what can I do to stop the flashing Hey, my 1998 Jeep Grand Cherokee did the same thing and it took me a long time to find a solution. It turned ...

Replaced both bulbs on rear brakes. Wonder if the pod that you put the bulbs in (both) could be bad or if it's an electrical problem in a fuse? Tried changing out the #23 fuse Replace the tailight ...

failure and my tail lights and liciense plate light all work. what is the problem? Hello and welcome to Fixya.com. Check to see if you have twin tail lamp bulbs on rear i mean when i say this two tail

...Message When the message came on the console saying rear lamp failure I replaced all the light bulbs and tested them. All break lights come one when I hit the breaks, but the error message still ...

my screen in the middle says brake lamp failure but there is no bulbs blown its just theres a wrong size bulb in one of the light sockets mine says it to with no lights out

rear lamp failure Rear lamp failure warning light comes on continuesly when key is turned on and brake pedal is applied before engine is started. one of your brake light bulbs has blown.

...lamp failure" but my lights still work, what does this mean? Make sure you look really close at the bulbs. There can be side markers, license bulbs, reverse lights, and third brake lights ...