Questions & Answers for: buick park avenue whining sound

buick park avenue will "surge" until i either let off the gas or accelerate. That sounds similar to a Throttle Position Sensor problem. At certain points within the sensor, it can accumulate corrosion

Ad

buick park avenue have? Also is this a difficult job to do? I have heard these cars are notorious for melting there intake manifolds, is there a metal replacment of some kind? 2 upper pellum and lower

Ad

Question about 1992 Park Avenue

1 Answer

...Buick Park Avenue I have a 1992 Buick park avenue that was starting then dying when you put it in gear then it wouldn't start at all cranked hard but wouldn't start i was told to check the fuel ...

Question about 2001 Park Avenue

1 Answer

...Buick Park Ave. While at 70 mph I can shift from D to 3 and back with no change in RPM and the whine it makes in D goes away while in 3rd. It comes back in D. I have the 3800 V6 engine and 130,000 ...

...buick park avenue, its front wheel drive. There is a vibration in the front when excelerating between 45 and 55 mph. I had the tires rebalanced and they are new. The vibration goes away when Im ...

how do you change a light bulb above the license plate in a 1989 buick park avenue How do you change a light bulb above the license Problem with the 1989 Buick Park Avenue

...buick park avenue Should be a little(usually silver) square box plugged into your fuse panel, usually above your left leg in drivers seat. Most vehicles , although i am not familiar with the Park ...

...buick park avenue is jerking when I press down on the gas pedel sometime it cut off on me .then when im on the highway I be going between 60 to 70 mph it jerks ,it slow down . and it will cut off and ...

buick park avenue. Its leaking trans fluid. I have recently overfilled the trans fluid as well. Put stop1989 buick park avenue wouldn't shift 25mph or over when speed got to 25 it started to shake

...40 mph when i stop and put it in Park it starts rite up Are you saying it does not start, or does not crank ?If it fails to crank, it could be the neutral safety switch or a bad spot on  the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...