Questions & Answers for: buick lesabre pulley tensioner

..."Tensioner on 1990 Buick Lesabre 3800 engine take belt off then make sure you have the right size socket and breaker bar to loosen the bolts on the tensioner and do everything in reverse to put new ...

...belt tension How do you relieve the tension on the Buick serpentine belt? One pulley is a tensioner. Put a wrench on the nut in the center of the pulley and relieve the tension from the

...buick lesabre can you tell me how to replace the serpentine belt for a 1993 buick lesabre? http://www.justanswer.com/view_image.aspx?href=http://gsi.xw.gm.com/image_en_us/gif/000/000/643/643206.gif ...

...buick lesabre. we thought it needed a harmonic balancer but we noticed that one of the pulleys is bouncing up and down about 2 cm each way. i believe its the tension pulley. any ideas on what to do? ...

8L Belt Tensioner How do you replace the belt tensioner pulley on a 1991 Buick Regal 3.8L Remove belt and unbolt center pulley bolt. I believe it's a backward theaded bolt. Turn to the right to loosen

...Buick LeSabre: How do you relieve tension on the serpentine belt? The tensioner has a small round hole on its face. There is no hole for a square drive, nothing to get a grip on. use the bolt head ...

...buick lesabre with a 3800 engine. Can I loosen Alternator so it can slip back on? There should be a TENSION PULLEY/ARM that accepts a large (3/4"?) wrench or cresent wrench. You rotate the pulley in ...

where is the tensioner pulley in a 1993 buick lesabre Heres a diagram of your belt and the pulleys, i have circled the tensioner for you to help you locate it, good luck.

I have a 95 Buick LeSabre...My idler tension pulley turns clockwise to loosen my serp.belt.Which way do i turn the bolt to my tensioner,to change the pulley out? Counterclockwise

buick lesabre custom 2001 my serpentine belt fell off while on vacation in Tahoe and I can't seem to get it back on. what would cause this? Those belts have a tensioner on them. IF the belt is too big