Questions & Answers for: buick lacrosse key fob lock

...it wont work at times.1 it may have a weak battery,2 there may be some kind of residue inside the key fob itself such as tea,coke,water, or even sweat. This will short the fob out at times.Thank ...

...buick lacrosse. I lost mine, and bought one from ebay. i really don't want to go to the dealer if i can help it. Transmitter ProgrammingImportant: All transmitters which are to be recognized by the ...

cannot locate the interior trunk release switch The 'trunk release' on on the Power door lock switch Hold it in the up position for 2 seconds. I dont think there is one. you should have a key fob.

...key fob or door lock switch You need to check the fuse for the trunk.It is located in the instrument panel fuse box.Should be on the left side of the panel.It should be labeled fuses on the ...

...Buick Lacrosse. Seems to work better from farther away. I HAVE HAD SIMILAR ISSUES WITH THE KEY FOB, OR "REMOTE" . UPON FURTHER INVESTIGATION, I OPENED UP THE REMOTE AND FOUND THAT THE THIN, SHINY ...

...Buick Lacrosse warning light started dinging while I was driving and the seat belt light for passenger seat started flashing even though there was no one in the seat. After stopping the car I could ...

...key fob desired to be programmed. Follow the scan tool on screen instructions. Remove the scan tool. Exit the vehicle. Operate all functions on transmitters to verify correct system operation. ...

...key fob When programming the fob you must hold down the door lock switch. When that is done the trunk opens and you can't continue with the process. Am I doing something wrong?? probably-- to program ...

...Buick LaCrosse Common ... repairpal.com > Problems > Buick > LaCrosse Door lock mechanism not operating properly on Buick LaCrosse. Door lockmechanisms ... problem details. 2005 Buick ...

...lacrosse Buick LaCrosse just got my fob brand new and it will not program Important: All transmitters which are to be recognized by the remote control door lock receiver (RCDLR) must be programmed in ...